Pitlock Saddle Clamp

Saddle clamp / seatpost clamp

PITLOCKs need a saddle clamp with flat, parallel pressure surfaces. If your clamp is not suitable for PITLOCKs , you can find the right ones here...

Item: Saddle clamp (without PITLOCK)

Material: aluminum, sandblasted matt, silver or black anodized.

Function: The seat clamp clamps the seat post on the bicycle frame and thus keeps the seat post in the correct, adjusted position.

You also need a PITLOCK axle to secure the seat post.

The Pitlock saddle axle (33mm) or Set 06 standard (33mm) always fits the PITLOCK saddle clamps, as the different sizes only change the diameter of the clamp but not the distance between the clamping surfaces.

Tips:

The size specification corresponds to the inner diameter of the saddle clamp.

The required size is usually on the seat tube or on the old clamp.

The outer diameter is measured at the end of the seat tube on the bicycle frame.
The diameter of the seat tube should ideally be slightly smaller than the size of the seat clamp.